

Cut and prepare AWG 12–30 wire with two blades operating vertically at the same time. The ZDBX-3 supports full stripping, semi-stripping and mid-stripping for different wire preparation tasks.
Online orders are for the 110V model. Need 220V? Contact us before ordering.
Shipping is calculated at checkout.
The ZDBX-3 uses two vertically operating blades to cut wire and perform full, semi or middle stripping. Its controls let the operator set up the cut and strip lengths for the job.
It supports AWG 12–30 wire with PVC, Teflon or glass insulation. The listed processing capacity is up to 150 pieces per minute at a 100 mm cutting length; actual output depends on the wire and job settings.
Remove a section of insulation between insulated portions of the wire. The illustration below shows exposed conductor in the middle of each wire.

| Model | ZDBX-3 |
|---|---|
| Power supply | 110V AC standard; 220V AC available on request |
| Power consumption | 260 W |
| Wire size | AWG 12–30 |
| Wire insulation | PVC, Teflon and glass wire |
| Stripping length | 0.1–30 mm |
| Cutting length | 0.1–99,999 mm |
| Processing capacity | Up to 150 pieces/min at 100 mm cut length; varies with job settings |
| Stripping modes | Full stripping, semi-stripping and mid-stripping |
| Machine dimensions (W × D × H) | 430 × 340 × 260 mm |
| Machine weight | 35 kg (approximately 77 lb), unpacked |